USB MFA TLS-IM Console
Arduino Leonardo / ATmega32U4 & Java Card. Local USB (Windows Web Serial / Android WebUSB): 19200 baud · 8 data bits · no parity · 1 stop bit · CRLF.
This independent console tests your user, binder, derive and bmac USB commands, plus APDU key/certificate and challenge verification on secp256k1 (not P-256). It does not yet open a TLS connection to a pNHSM. PIN, challenges and responses stay in this browser page and are not sent to WordPress.
1. USB connection
Windows: use Chrome/Edge and Web Serial. Android: use Chrome and a USB OTG cable, then select the Arduino Leonardo via WebUSB. Accept both the Chrome and Android USB permission dialogs. If Auto cannot find the token, try WebUSB CDC-ACM. No EtherTrust app is installed.
2. User PIN
USB command: user ****\r\n. Successful response: OK\r\n. The PIN is cleared from its field after the request.
3. Binder
Elapsed: —
4. Derive — hardware ACK
Press the physical ACK button on your TLS-IM token now.
Elapsed: —
5. Optional bMAC software attestation
Typical computation: ~30 seconds. The token’s decimal timing unit depends on its firmware. A digest alone is not proof of integrity: compare it with a trusted enrolled reference for the same seed and relevant timing profile.
6. TLS-IM identity — ECDSA secp256k1
All APDU requests and responses are ASCII HEX terminated by CRLF. SW=9000 indicates APDU success. Both signature checks use secp256k1 (not secp256r1/P-256). The certificate hashes only X || Y (64 bytes, one SHA-256); the challenge hashes its 32-byte input once.
The CA key above is your example, not a trust guarantee. Independently confirm it is the CA you intend to trust. The certificate verifies ECDSA-secp256k1 over SHA256(X || Y), the 64-byte TLS-IM coordinates without the 04 prefix (single SHA-256).
The challenge signature checks possession of the private key corresponding to the public key read from this token. Verification is local in the browser; the CA key, challenge, signatures and PIN are not posted to WordPress.
USB transaction console
The console intentionally logs command names and durations, not PINs, cryptographic inputs or secret outputs. To revoke USB access, use your browser’s site permission controls.